Enclosed AV Cabinet Cooling fan system / multi-speed fan control

Description

AV Cabinet Cooling fan system, with multi-speed control
This cooling system is designed to be mounted inside your equipment cabinet. It will quietly pull the warm air out of your cabinet and exhaust it out the back or top.  Plug the fan power unit into a switched AC outlet on your system, and the fans will only come on when the equipment is turned on or the switch is activated.
It has 2 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.  The fans are integrated into a single housing.
YOU control the fan speed, using the multi-speed fan controller.
This cooling system is intended to help cool: Computers / Receivers / Amplifiers / Stereos / Audio Visual & Home Theater Cabinets.
What's
Included?
THE COOLING SYSTEM INCLUDES:
1 x dual-80mm fan cabinet unit, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.
Note:
In the listing pictures, the cooling systems are shown in two views: 1) against a woodgrain panel, to show how it might look when mounted in a cabinet and 2) against a colored panel, displaying the complete system.
These panels are used for display purposes only, and are not included with the system.
1 x dual-80mm
cabinet fan unit
(2 fans), with
mounting plates
and grills.
The mounting
screws are shown
already installed.
1 x multi-speed
power transformer,
with a 4-1/2 foot
cable. It lets
you choose from 6
different speeds
for the fans.
Features
The cooling system has 2 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.
The mounting plate & grills seal air and make installation easy.   The fan unit is securely fastened to your cabinet by screws.
Also includes a multi-speed power transformer, which plugs into any 120 volt outlet.  You control the speed of the fan, using this adjustable transformer.  It can be set to any one of 6 different speeds.
Plug the transformer into an switched AC outlet on your system, and the fans will only come on when the equipment is turned on or the switch is activated.  If you don't have a switched AC outlet, please see one of my thermostat, 12 volt trigger, or USB-controlled systems.  However, you can add a fan controller to your system later, if you decided you need it.
INTERNATIONAL BUYERS:
The unit's power transformer (supplied with the cooling system), can be switched to either 110/120 volt or 220/240 volt operation.  However, the transformer uses the standard US-style 2-prong plug.
Contact me if you need an adapter plug (
there is no charge
), and specify one of the three types:  1) NZ/AU  (2 slanted prongs) 2) Euro (2 round prongs), or UK (three large prongs).
Even at medium speeds settings, the fans will replace a volume of air equal to that of small to medium cabinet areas several times per minute (see airflow specs below).
All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
The standard system comes set up so that hot air enters the front of the fan unit (finished side, with mounting plate and grills), and exits out the back.
If you need to have air coming out the front, just let me know.  There is no extra charge for this option.  You can also easily change the fan orientation later, if necessary.
The system comes with instructions and a mounting template to facilitate installation.
It comes completely assembled, with all components installed, wired and ready to go!
Specifications
Dimensions:
The 80mm dual-fan cabinet cooling unit measures approximately 4-5/8" high x 8" wide, which includes the mounting plate.  The required hole is approximately 3-1/4" high x 6-5/8" wide.  The unit is 1-1/4" thick behind the mounting plate, and only requires about 1/3" additional space for airflow.
Maximum current draw:
.32 amps or 4 watts.  Normal operation (at lower speeds) will draw less current and watts.
Bearing type:
Super quiet, long lasting Fluid Dynamic bearings.
The table below shows specifications for
both of the 2 fans
,
when run together,
at several different speeds.
The shaded area on the table indicates suggested fan speeds for this system.
With cabinet cooling, slow (and quiet) are the way to go!
Fan Speed
Full
3/4
2/3
1/2
1/3
1/4
CFM (cubic feet of air per minute)
62
46
40
32
20
16
DB (decibels/ noise level)
22
19
16
13
10
7
Fan RPM (speed)
2000
1500
1320
1000
660
500
If you would like to see this cooling system's installation instructions, please contact me and I will supply a .PDF file with the contents.
Payment, Shipping
& Warranty
Payment:
You can pay using Paypal, or by using a major credit card, after your purchase.
Shipping:
Within the U.S., shipping is normally by Priority Mail.  For International shipments, I use USPS First Class International.
Import duties, etc.:
International Buyers – Please Note:
Import duties, taxes and charges are
not included
in the item price or shipping charges. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
Returns:
Within the first 30 days after receipt, systems which are in original condition can be returned for a full refund of the purchase price.  Please contact me for shipping address and instructions
.
Warranty:
All systems are covered by a 12 months parts & labor warranty.
YOUR SATISFACTION IS GUARANTEED!
Custom Systems
Please contact me if you have any questions, or if you want to discuss a custom cooling system to fit your special needs:
Click here to ask a question
You can also visit my Ebay store, where you will find systems designed for a number of different cooling needs:
Click here for my store
All text and images on this page (other than those provided by Ebay), copyright © 2007-2017 by DR McKenzie. Rev. 051717